The tensile property of 3003 aluminum plate is generally close to 160-170 mpa in H24 state, which is about 20% higher than that of 1060 and 1100 aluminum plate series. It is an aluminum plate and strip product with lower tensile strength among alloy aluminum plates. At the same time, it should be noted that the price is also It is lower, so for products with a slight tensile strength advantage, 3003 aluminum plates can be selected. It refers to the highest value of breaking strength suitable for a tensile testing machine. Tensile strength mainly reflects breaking resistance and is an important indicator in mechanical properties.
The tensile strength of 3003 aluminum plate refers to the maximum stress value before the aluminum plate is pulled apart. After yielding to a certain level, due to the rearrangement of internal grains, the anti-deformation ability of the aluminum plate has been further improved. After that, the ability of the aluminum plate to resist deformation was significantly reduced, and large plastic deformation occurred at the weakest point, where the cross-section of the specimen rapidly shrank, causing necking until fracture and failure. The maximum stress value before the aluminum plate breaks under tension is called the strength limit or tensile strength.
Post time: Nov-29-2023