2014 T6 Aluminium Sheet
Machinability of aluminium 2014A Sheet is very good. 2014 aluminum sheet is usually used in some occasions with high strength and hardness (including heat). For example, heavy forgings, plate and extrusion materials are used for aircraft structures, the first stage fuel tank of multistage rocket and spacecraft parts, wheels, truck frame and suspension parts.
A high strength 4 to 5% Copper alloy produced in extruded bar and profile form, in the fully heat-treated condition (solution heat-treated & artificially aged).Normally stocked in the T651 condition (stress relieved by controlled stretching) Except for sizes under 10mm diameter and over 203.2mm diameter. (T6 only). Over 203.mm diameter is manufactured to chemical composition Only. Typical applications of Aluminium 2014 Sheet are high strength componenets especially for use in the aerospace and defence industries.
2014 T6 Aluminium Sheet Temper 0, H32, H34, H38 as per ASTM B209, ASTM-B-209, EN573, and EN485 international standards. Aluminum Alloy 2014 O, T4, T42, T4510, T4511, T6, T62, T6510, or T6511 UNS Number – UNS A92014, Specification – AMS-QQ-A-200/2
Sasa Aluminium is the leading manufacturer and exporter of 2014 T6 Aluminium Sheet. Supplier of ASTM B209 2014 T6 Aluminium Sheet from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 2014 T6 Aluminium Sheet price. The general widths of 2014 T6 H16 Aluminum sheets are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 2014 T6 Commercial Aluminium Sheet offered by Sasa Aluminium , China. Stockist of 2014 T6 Aluminium Sheet, H32 2014 T6 Aluminium Stucco Sheet, H38 Commercial 2014 T6 Aluminium Sheet, ASME SB209 2014 T6 Aluminium Patterned Sheet, 2014 T6 Aluminium Embossed Sheet, 2014 T6 Aluminium Extruded Sheet, 2014 T6 Aluminium Sheet and 2014 T6 Aluminium Sheet in China.
Standard Dimensions of 2014 T6 Aluminium Sheet
Standard dimensions (a x b) of Aluminium 2014 T6 Sheet
Aluminium 2014 T6 Sheet up to 9.9 mm
2.000 x 1.000 mm
2.500 x 1.250 mm
3.000 x 1.500 mm
Oversize Aluminium 2014 T6 Sheet
4.000 x 2.000 mm
6.000 x 2.500 mm
8.000 x 2.500 mm
Other dimensions on request
| Alloy | ASTM B209 1050, 1060, 1100, 1235, 3003, 3004, 3105, 5052, 5754, 6061, 8011 |
| Aluminium 2014 T6 Sheet Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 2014 T6 Sheet Thickness | 0.5mm-150mm |
| Aluminium 2014 T6 Sheet Width | 500-2000mm |
| Aluminium 2014 T6 Sheet Length | to clients’ requirement |
| Aluminium 2014 T6 Sheet Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 2014 T6 Aluminium Sheet Coating finish | PVDF, POLYESTER(PE) |
| Surface | Bright, polished, hair line, brush, sand blast, checkered, embossed, etching, etc. |
| Gloss | Meet the customer requirement |
| Total coating thickness | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Coating hardness | (pencil hardness) more than 2H |
| Coating adhesive | No lower than1st grade |
| Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Flexibility (T-bend) | 2T |
| MEK resistance | More than 10 |
| Available Aluminium 2014 T6 Sheet Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 2014 T6 Sheet Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 2014 T6 Sheet Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 2014 T6 Sheet. One 40GP container can load about 24 tons Aluminium 2014 T6 Sheet |
| ASTM B209 Alloy 2014 T6 Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 2014 T6 Sheet is coated with protective polyester material, thickness more than 6 micron | |
| Export to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
2014 T6 Aluminium Sheet Products Show:
| 2014 T6 Aluminium Sheets Product Range | ||||
|---|---|---|---|---|
| Alloy No. | Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
| A1050, A1060, A1070, A1100 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
| A3003, A3105, A3004 | 0.2-5.0 | 20-2200 | 20-8000 | O, H14, H18, H24 |
| A5052, A5005, A5083, A5086, A5754 | 0.2-5.0 | 20-2200 | 20-8000 | O, H18, H24, H32, H34, H111, H112 |
| A6061, A6082, A6063 | 0.2-5.0 | 20-2200 | 20-8000 | T4, T6, T651 |
| A8011 | 0.2-5.0 | 20-2200 | 20-8000 | O, H12, H22, H14, H16, H18, H24, H26 |
Aluminium 2014 T6 Sheets Manufacturer in China:
1100-H14 Aluminum Sheet: ASTM-B-209
2024-T3 ALCLAD Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4041
2024-T3 BARE Aluminum Sheet: AMS-QQ-A-205/5, ASTM-B-209, AMS-4037
2219-T6 Aluminum Sheet:
2219-O Aluminum Sheet: AMS-QQ-A-250/30
3003-H14 Aluminum Sheet: ASTM-B-209
3003-O Aluminum Sheet: ASTM-B-209
4047-F Aluminum Sheet: AMS-4185, BAlSi-4
5052-H32 Aluminum Sheet: ASTM-B-209, AMS-4016
5052-H38 Aluminum Sheet: ASTM-B-209
5052-O Aluminum Sheet: ASTM-B-209, AMS-4015
6061-O Aluminum Sheet: ASTM-B-209, AMS-4025
6061-T4 Aluminum Sheet: ASTM-B-209, AMS-4026
6061-T6 Aluminum Sheet: ASTM-B-209, AMS 4027
7075-T6 Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
7075-O ALCLAD Aluminum Sheet: ASTM-B-209
7075-O BARE Aluminum Sheet: AMS-QQ-A-250/12, AMS-4045
Aluminum Specular Lighting Sheet
Standard Specification of 2014 T6 Aluminium Sheet
Standards and specifications by country
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| EN 2089/2395 | 2014A | T6(T62)/T4(T42) | |
| EN 2087/2088 | 2014A clad | T6(T62)/T4(T42) | |
| EN 4101 | 2024 | T4 | |
| EN 2090/2091/2703/4001 | 2024 clad cmq | T3/T4/T4(T42)/T351 | |
| EN 3474/3997/3998/3999 | 2024 cmq | T81/T3/T4(T42)/T351 | |
| EN 2694/EN 3341 | 6061 | T6(T62)/T4(T42) | |
| EN 4449/4450 | 7050 | T76/F(T762) | |
| EN 2696 | 7075 | T6(T62) | |
| EN 2092 | 7075 clad | T6(T62) | |
| EN 2802/3333 | 7475 | T761/F(T762) | |
| EN 2803/3332 | 7475 clad | T761/F(T762) | |
| France | |||
| AIR 9048.010/.030/ | 2014 | F(T42)/F(T62)/T4/ | |
| .020/.040/.050 | 2014 | T6/T451 | |
| AIR 9048.060/.080/.070/.090 | 2014 clad | F(T42)/F(T62)/T4/T6 | |
| AIR 9048.100/.110/.120 | 2024 | ||
| AIR 9048.130/.140 | 2024 clad | F(T42)/T3 | |
| AIR 9048.150 | 2618A | H28(T62) | |
| AIR 9048.170 | 2618A clad | H28(T62) | |
| AIR 9048.190/.200 | 5086 | O, H111/H22, H32 | |
| AIR 9048.210/.220/.230/.240 | 6061 | O, H111(T42)/T4/ O, H111(T62)/T6 | |
| AIR 9048.260/.270 | 7075 | T6/T76 | |
| AIR 9048.280 | 7075 clad | T6 | |
| AIR 9048.290 | 7475 | T76 | Boeing |
| Germany | |||
| W.-Nr. 3.1254 | 2014A | T4, T6 | |
| W.-Nr. 3.1354 | 2024 | O(T42), T3 | |
| W.-Nr. 3.1364 | 2024 clad | O(T42), T3 | |
| W.-Nr. 3.3214 | 6061 | O(T62), T6 | |
| W.-Nr. 3.4364 | 7075 | T6 | |
| W.-Nr. 3.4374 | 7075 clad | O(T62), T6 | |
| W.-Nr. 3.4377 | 7475 clad | T76 | |
| UK | |||
| BS L16/17 | 1200 | H4/O | |
| BS L156/157/158*/159* | 2014A | ||
| 158*/159* | 2014A clad | (T42)(T62) | BAE Systems |
| BS L163/164/165 | 2014A clad | T3/F(T42), T4/T6 | |
| BS L166*/167* | 2014A clad | F(T42), T4/T6 | |
| BS L109/110 | 2024 clad | T3/F(T42) | |
| DTD5070 | 2618A clad | T6 | |
| BS L59/60/61 | 3103 | H6/H2/O | |
| BS L80/81 | 5251 | O/H6 | |
| BS L113 | 6082 | T4, T6 | |
| BS L88 | 7075 clad | T6 | |
| USA | |||
| AMS QQ-A-250/3 | 2014 clad | O, T4, T6 | |
| AMS QQ-A-250/4 | 2024 | O, T3 | |
| AMS 4037 | 2024 | T3 | |
| AMS QQ-A-250/5 | 2024 clad | O, T3 | |
| AMS 4041 | 2024 clad | T3 | |
| AMS QQ-A-250/30 | 2219 | O(T62), T31(T81), T37(T87) | |
| AMS QQ-A-250/2 | 3003 | O, H14 | |
| AMS 4347 | 6013 | T4 | |
| AMS 4216 | 6013 | T6 | |
| AMS 4025/4026/4027 | 6061 | O, F, T4, T42, T45, T6, T62, T651 | |
| AMS QQ-A-250/12 | 7075 | O, T6, T73 | |
| AMS QQ-A-250/24 | 7075 | T76 | |
| AMS QQ-A-250/13 | 7075 clad | O, T6, T73 | |
| AMS QQ-A-250/26 | 7075 clad with 7011 | T76 | |
| AMS QQ-A-250/25 | 7075 clad with 7072 | T76 | |
| European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
|---|---|---|---|---|---|---|
| EN AW-1050 A | 1E | 1050 | Al99.5 | Al99.5 | 19500, 19501 | 1 S |
| EN AW-1070 A | – | 1070 | Al-99.7 | Al-99.7 | 19700 | – |
| EN AW-1100 | IC | 1100 | Al-99.0 | Al-99.0 | 19000 | 2 S |
| EN AW-2011 | FC1 | 2011 | AlCuBiPb | AlCu6BiPb | – | 28S |
| EN AW-2014 | HE15 | 2014 | AlCuSiMn | AlCu4SiMg | 24345 | B26S |
| EN AW-2024 | – | 2024 | AlCuMg2 | AlCu4Mg1 | – | 24 S |
| EN AW-3003 | N3 | 3003 | AlMnCu | AlMn1Cu | 31000 | 3 S |
| EN AW-3103 | – | 3103 | – | AlMn1 | – | – |
| EN AW-6101A | E91E | 6101 | E AlMgSi 0.5 | E AlMgSi(A) | 63401 | D50S |
| EN AW-6005 | – | 6005 | AlMgSi0.7 | AlSiMg | 62400 | C51S |
| EN AW-6351 | HE30 | 6351 | AlMgSi1 | AlSiMg0.5Mn | 64430 | B51S |
| EN AW-6060 | – | 6060 | AlMgSi 0.5 | AlMgSi | – | – |
| EN AW-6061 | HE20 | 6061 | AlMgSiCu | AlMg1SiCu | 65032 | 65S |
| EN AW-6063 | HE9 | 6063 | AlMgSi0.5 | AlMg0.7Si | 63400 | 50S |
| EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
Common Aluminium 2014 T6 Sheet Grades
- 2014 T6 Aluminium Sheet Grade 19000
- 2014 T6 Aluminium Sheet Grade 19500
- 2014 T6 Aluminium Sheet Grade 24345
- 2014 T6 Aluminium Sheet Grade 24534
- 2014 T6 Aluminium Sheet Grade 31000
- 2014 T6 Aluminium Sheet Grade 52000
- 2014 T6 Aluminium Sheet Grade 53000
- 2014 T6 Aluminium Sheet Grade 54300
- 2014 T6 Aluminium Sheet Grade 65032
- 2014 T6 Aluminium Sheet Grade 63400
- 2014 T6 Aluminium Sheet Grade 64430
- 2014 T6 Aluminium Sheet Grade 74530
- 1100 Aluminum Sheet
- 1050 Aluminum Sheet
- Aluminium 2014 T6 Sheet
- Aluminum 2024-t351 Sheet
- 3003 Aluminum Sheet
- 5052 Aluminum Sheet
- 5086 Aluminum Sheet
- 5083 Aluminum Sheet
- 5754 Aluminum Sheet
- 6061 Aluminum Sheet
- 6082 T6 Aluminum Sheet
- Aluminum Alloy 6351 T6 Sheet
- 6063 2014 T6 Aluminium Sheet
- 6066-T6 Aircraft Aluminum Alloy Sheet
- 6005 Aluminum Sheet
- 7075 Aluminum Sheet
- 7050 Aluminum Sheet
- LM-2 Aluminum Sheet
- LM6 Aluminum Sheet
2014 T6 Aluminium Sheet Sizes
| Sizes (mm) | Theoretical Mass KG/sheet |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
2014 T6 Aluminium Sheet Weight Chart
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 2014 T6 Aluminium Sheet | 0,30 mm | 0,810 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,40 mm | 1,080 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,50 mm | 1,350 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,60 mm | 1,620 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,70 mm | 1,890 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,80 mm | 2,160 Kg/m2 |
| 2014 T6 Aluminium Sheet | 0,90 mm | 2,430 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,00 mm | 2,700 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,20 mm | 3,240 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,40 mm | 3,780 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,50 mm | 4,050 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,60 mm | 4,320 Kg/m2 |
| 2014 T6 Aluminium Sheet | 1,80 mm | 4,860 Kg/m2 |
| 2014 T6 Aluminium Sheet | 2,00 mm | 5,400 Kg/m2 |
| 2014 T6 Aluminium Sheet | 2,20 mm | 5,940 Kg/m2 |
| 2014 T6 Aluminium Sheet | 2,50 mm | 6,750 Kg/m2 |
| 2014 T6 Aluminium Sheet | 3,00 mm | 8,100 Kg/m2 |
| 2014 T6 Aluminium Sheet | 4,00 mm | 10,800 Kg/m2 |
| 2014 T6 Aluminium Sheet | 5,00 mm | 13,500 Kg/m2 |
| 2014 T6 Aluminium Sheet | 6,00 mm | 16,200 Kg/m2 |
| 2014 T6 Aluminium Sheet | 10,00 mm | 27,000 Kg/m2 |
| 2014 T6 Aluminium Sheet | 12,00 mm | 32,400 Kg/m2 |
| 2014 T6 Aluminium Sheet | 15,00 mm | 40,500 Kg/m2 |
| 2014 T6 Aluminium Sheet | 20,00 mm | 54,000 Kg/m2 |
2014 T6 Aluminium Sheet Chemical Composition
| Alloy (ISS) | Equivalent alloy (A.A) | Copper | Magnesium | Silicon | Iron | Managanese Others* (Total) | Remarks | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Old | New | U.S.A | Min. | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Max | Max. | Aluminum 99.0% Min. | ||
| H 15 | 24345 | 2014 | 3.8 | 5.0 | 0.2 | 0.8 | 0.5 | 1.2 | 0.7 | 0.3 | 1.2 | 0.5 | — | ||
Aluminium 2014 T6 Sheet Mechanical Properties
| Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
|---|---|---|---|---|---|---|
| Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) | ||
| EN AW-2014 | O | – | 250 | – | 135 | 10 |
| T4 | 370 | – | 230 | – | 11 | |
| T6 | 415 | – | 370 | – | 5 | |
| Alloy Designation | UK Specifications |
US Specifications |
US Federal Specifications |
European Specifications |
Other |
|---|---|---|---|---|---|
| 2014A A92014 |
BS 7 L37 2014A Rivet stock BS 3 L63 2014A-T6 tube BS 2 L77 2014A Forging stock BS 2 L87 2014A-T6 Bar BS 2 L93 2014A-T651 Plate BS L102 2014A-T4 Bar BS L103 2014A-T4 Forging Stock BS L105 2014A-T4 Drawn tube BS L156 2014A-T4 Bare Sheet BS L157 2014A-T6 Bare Sheet BS L158 2014A-T4 Bare Sheet, close tolerance BS L159 2014A-T6 Bare Sheet, close toleranceBS L163 2014A-T3 Clad Sheet BS L164 2014A-T4 Clad Sheet BS L165 2014A-T6 Clad Sheet BS L166 2014A-T4 Clad Sheet, close tolerance BS L167 2014A-T6 Clad Sheet, close toleranceBS L168 2014A-T6 / T6511 BarDTD 5010 Plate DTD 5030 Clad plate DTD 5040 Clad plate BS H15, HS15, HP15, HT15, HE15 |
AMS 4028 2014-T0 Sheet /Plate AMS 4029 2014-T651 Sheet , plate AMS 4121 2014-T6/T6511 Bar AMS 4133 2014-T6 Forging AMS 4134 2014-T6 Die Forging AMS 4153 2014-T6 Extrusions |
QQ-A-200/2 2014-T4 Extruded bar QQ-A-200/2 2014-T6 Extruded bar QQ-A-225/4 2014-T4 Cold finished bar QQ-A-225/4 2014-T6 Cold finished bar QQ-A-250/3 2014-T4 Clad sheet QQ-A-250/3 2014-T6 Clad sheet QQ-A-367 MIL-A-21180 |
WS 3.1255 EN 2087 2014A-T6 Clad sheet EN 2088 2014A-T4 Clad sheet EN 2089 2014A-T6 Sheet EN 2100 2014A-T4511 Extruded bar EN 2324 2014A-T6 EN 2384 2014A-T6511 Extruded bar EN 2395 2014A-T4 Sheet EN 2634 2014A-T4511 Extruded bar EN 2635 2014A-T6511 Extruded bar, peripheral coarse grain control EN 2639 2014A-T6 |
A-U4SG AlCu4SiMg AECMA 2387 |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
2014 T6 Packing Information of Aluminum plate :
Application of 2014 T6 Aluminium Sheet
2014 T6 Aluminium Sheet is the most widely used form of Industrial Aluminium. 2014 T6 Aluminium Sheets find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
2014 T6 Aluminium Sheet Applications
