2A12 Aluminum Thin Wall Tube
2A12 aluminum alloy is a high-strength aluminum alloy that is commonly used in aerospace and aviation applications. The “thin wall tube” refers to a specific form of tubing made from the 2A12 aluminum alloy, where the walls of the tube are relatively thin compared to its outer diameter.
The properties of 2A12 aluminum alloy thin wall tube can vary depending on the specific manufacturing process and the dimensions of the tube. However, 2A12 alloy is known for its excellent strength-to-weight ratio, good machinability, and resistance to fatigue. It is often used in structural components of aircraft, including wing spars, fuselage frames, and other parts that require both strength and weight savings.
Specifications of 2A12 aluminum thin wall tube: |
Grade | 2A12,2024,5A06O,5652, 5086, 5056, 5754, 6061, 6062, 6063, 5052H18, 5083H32 etc. |
Standard | ASTM B210, ASTM B234, ASTM B241 |
Sizes | 1/8″ – 16″ (3mm – 2500mm) OD .020″ – 2″ (.2mm – 150mm) wall (1m-12m) Length |
Technology |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Form | seamless, drawn and coiled Tubing |
Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
Surface | Anodized, Oxidation, electrophoresis coating, fluorine carbon spraying |
TYPE OF 2A12 aluminum thin wall tube: |
EQUIVALENT GRADES OF 2A12 aluminum thin wall tube: |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
2A12 | - | A92012 |
A2124 |
N8 | - |
A-U4Pb2 |
EN AW-2014A |
CHEMICAL COMPOSITION OF 2A12 aluminum thin wall tube: |
Grade | Al | Mg | Si | Fe | Cu | Zn | Ti | Mn | Cr |
2A12 | Remainder | 1.2 – 1.8max | 0.50 max | 0.50max | 3.8-4.9 |
0.25 |
0.15max |
0.3-0.9 |
0.10 |
2A12 aluminum thin wall tube Mechanical Properties |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
2A12 | 32 | 15 | 10 |
Why Choose Us: |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. e guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa aluminum’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as