ASTM B209 5052-H32 Aluminum Coil Corrosion Resistant Al-Mg Alloy
ASTM B209 5052-H32 Aluminum Coil Overview
ASTM B209 5052-H32 Aluminum Coil is a non-heat-treatable aluminum-magnesium alloy product known for good corrosion resistance, formability, weldability and moderate strength. The H32 temper is strain hardened and partially annealed, providing a practical balance between strength and fabrication performance.
SASA ALUMINUM supplies 5052-H32 aluminum coil and coiled sheet with customized thickness, width, coil ID, coil OD, coil weight, surface condition and processing requirements. The material is widely used for marine components, transportation equipment, enclosures, architectural products and general industrial fabrication.
5052-H32 Aluminum Coil Quick Information
Alloy / Temper: 5052-H32
Standard: ASTM B209 / B209M
Product: Aluminum Coil / Coiled Sheet
Surface: Mill Finish / Coated / Customized
Dimensions: Thickness, width, coil ID/OD and coil weight can be customized
Documentation: MTC and inspection documents available as required
5052-H32 Aluminum Coil Specifications
| Item | Specification |
|---|---|
| Alloy / Temper | 5052-H32 |
| Standard | ASTM B209 / B209M or Agreed Specification |
| Product Form | Aluminum Coil / Coiled Sheet |
| Thickness | Customized According to Order Requirements |
| Width | Customized According to Order Requirements |
| Coil ID / OD | Specified According to Processing and Handling Requirements |
| Coil Weight | Customized / Maximum Coil Weight Subject to Review |
| Surface | Mill Finish / Coated / Customized Surface |
| Edge | Mill Edge / Slit Edge as Required |
| Supply Form | Coil / Slit Coil / Cut-to-length Material When Required |
| Certificate | Material Test Certificate Available |
Key Characteristics of 5052-H32 Aluminum
- Good corrosion resistance: performs well in general atmospheric, marine and industrial environments.
- Good formability: suitable for bending, forming and fabricated sheet-metal components.
- Good weldability: widely used in welded aluminum structures and fabricated parts.
- Moderate strength: stronger than many common 3xxx-series aluminum alloys while retaining practical forming performance.
- Non-heat-treatable: mechanical properties are developed mainly through strain hardening.
- H32 temper: strain hardened and stabilized to provide a balance between strength and ductility.
Chemical Composition of 5052 Aluminum
5052 is an aluminum-magnesium alloy with chromium additions. Magnesium is the principal alloying element and contributes to strength and corrosion resistance. Actual chemical composition should be confirmed according to the applicable specification and material certificate.
| Element | Mg | Cr | Fe | Si | Cu | Mn | Zn | Al |
|---|---|---|---|---|---|---|---|---|
| 5052 | 2.2-2.8% | 0.15-0.35% | ≤0.40% | ≤0.25% | ≤0.10% | ≤0.10% | ≤0.10% | Balance |
Mechanical Properties of 5052-H32 Aluminum Coil
5052-H32 aluminum coil provides a practical combination of moderate strength and formability. Mechanical properties can vary with product thickness, manufacturing condition and the applicable specification, so final requirements should be confirmed against the ordered gauge and material certificate.
| Property | Typical Reference |
|---|---|
| Tensile Strength | Approx. 210-260 MPa, subject to thickness and applicable specification |
| Yield Strength | Approx. 130 MPa or higher depending on product thickness and condition |
| Elongation | Depends on thickness and test specimen requirements |
| Density | Approx. 2.68 g/cm³ |
| Temper | H32 — Strain Hardened and Stabilized |
The values above are general references and should not replace the requirements of ASTM B209/B209M or the material test certificate for the ordered product.
3003 vs 5052-H32 vs 5083 Aluminum Coil
The appropriate aluminum alloy depends on required strength, formability, corrosion environment, welding requirements and cost. 5052-H32 is often selected when greater strength and corrosion resistance are required than typical 3003 products without moving to a higher-alloy marine grade such as 5083.
| Alloy | Main Characteristic | Relative Strength | Relative Cost | Typical Selection |
|---|---|---|---|---|
| 3003 | Good formability and general corrosion resistance | Lower | Lower | General sheet metal, enclosures and formed components |
| 5052-H32 | Good balance of corrosion resistance, strength, formability and weldability | Medium | Medium | Marine components, transportation, enclosures and fabricated products |
| 5083 | Higher strength Al-Mg alloy for demanding structural and marine service | Higher | Higher | Marine structures and higher-strength welded components |
5052-H32 Aluminum Coil Processing & Fabrication
5052-H32 aluminum coil can be supplied for further forming, cutting and fabrication according to the customer’s production process. Coil dimensions, edge condition and surface requirements should be specified when the material will be used on automated or high-volume processing lines.
| Processing Option | Typical Requirement |
|---|---|
| Slitting | Customized strip width and slit edge according to production requirements |
| Cut-to-Length | Coil can be processed into aluminum sheet according to specified dimensions |
| Bending & Forming | Suitable for fabricated components when bend radius and forming direction are matched to gauge and temper |
| Welding | Good weldability for fabricated aluminum assemblies using suitable procedures and filler materials |
| Surface Processing | Mill finish, coating and other agreed surface requirements |
| Protective Film | Available when required to protect finished surfaces during fabrication and transportation |
Inspection & Quality Control
Inspection requirements for 5052-H32 aluminum coil can be arranged according to ASTM B209/B209M, customer specifications and downstream processing requirements.
| Inspection Item | Purpose |
|---|---|
| Chemical Composition | Verify 5052 aluminum alloy chemistry |
| Thickness Inspection | Verify ordered gauge and thickness tolerance |
| Width Inspection | Verify coil or slit-coil width requirements |
| Mechanical Testing | Verify tensile properties when required by the applicable specification |
| Surface Inspection | Check surface condition, appearance and visible defects |
| Edge Inspection | Check mill edge or slit-edge condition according to the order |
| Coil Dimensions | Verify coil ID, OD and weight where specified |
| Material Documentation | MTC and agreed inspection documents available according to order requirements |
Applications of 5052-H32 Aluminum Coil
5052-H32 aluminum coil is widely used for fabricated components requiring a combination of corrosion resistance, moderate strength, formability and weldability.
| Marine
Boat panels and marine components |
Transportation
Vehicle panels and fabricated parts |
Electrical Enclosures
Cabinets, housings and equipment covers |
| Architectural
Panels and formed building components |
Sheet Metal Fabrication
Bent, formed and welded components |
Industrial Equipment
Covers, tanks and machinery components |
5052-H32 Aluminum Coil Packaging
5052-H32 aluminum coils are packed according to coil dimensions, surface condition, unit weight and transportation requirements. Suitable export packaging helps protect the coil from moisture, edge damage, deformation and surface scratching during handling and international shipment.
- Moisture-resistant protective wrapping.
- Edge and corner protection where required.
- Core support according to coil dimensions.
- Material, alloy, temper and batch identification labels.
- Export pallets or wooden packaging according to coil size and shipping method.
Information Needed for a 5052-H32 Aluminum Coil Quote
Providing complete coil specifications helps us review production feasibility, processing requirements, packaging and quotation more accurately.
| Required Information | Example / Description |
|---|---|
| Alloy / Temper | 5052-H32 |
| Standard | ASTM B209 / B209M or Customer Specification |
| Thickness | Required Gauge and Tolerance |
| Width | Coil Width / Slit Width |
| Coil ID / OD | According to Processing Equipment Requirements |
| Coil Weight | Required or Maximum Unit Coil Weight |
| Surface | Mill Finish / Coated / Protective Film if Required |
| Edge | Mill Edge / Slit Edge |
| Quantity | Total Weight / Number of Coils |
| Destination | Port / Country |
| Documentation | MTC / Inspection / Additional Documentation if Required |
Why Choose SASA ALUMINUM?
Customized Coil Specifications
Thickness, width, coil dimensions, unit weight, surface and edge requirements can be reviewed according to customer specifications.
Processing Support
Slitting, cut-to-length processing, protective film and other downstream requirements can be arranged when specified.
Material Traceability
Material certificates and agreed inspection documentation are available according to order requirements.
Quality Control
Dimensions, surface condition, edge quality and specified mechanical requirements can be checked before shipment.
Export Packaging
Packaging is selected according to coil size, surface protection requirements and international transportation conditions.
Frequently Asked Questions
What is 5052-H32 aluminum coil?
5052-H32 is a non-heat-treatable aluminum-magnesium alloy supplied in a strain-hardened and stabilized temper. It provides a useful balance of corrosion resistance, moderate strength, formability and weldability.
What is the difference between 5052-H32 and 3003 aluminum coil?
5052-H32 generally provides higher strength and improved corrosion resistance, while 3003 is commonly selected when excellent formability and lower material cost are the main priorities.
What is the difference between 5052 and 5083 aluminum?
5052 provides good corrosion resistance, formability and moderate strength for general fabrication. 5083 has a higher magnesium content and is generally selected when greater strength is required for demanding marine and structural applications.
Can 5052-H32 aluminum coil be bent and formed?
Yes. 5052-H32 has good forming characteristics. The suitable bend radius depends on material thickness, grain direction, forming method and the required final geometry.
Can you supply slit 5052-H32 aluminum coil?
Yes. Customized slit widths and coil dimensions can be reviewed according to customer requirements and production feasibility.
Can protective film be applied?
Yes. Protective film can be provided when required to reduce surface scratching during downstream fabrication, handling and transportation.
Can MTC and inspection documents be supplied?
Yes. Material certificates and agreed inspection documentation can be supplied according to the confirmed order requirements.
What information should I provide for a quotation?
Please provide alloy and temper, standard, thickness, width, coil ID/OD, unit coil weight, quantity, surface, edge condition, destination and any inspection or documentation requirements.
Request a 5052-H32 Aluminum Coil Quote
Send your required thickness, width, coil dimensions, quantity, surface and destination. SASA ALUMINUM will review the specification before confirming the offer.
